{"id":515,"date":"2026-10-08T12:05:11","date_gmt":"2026-10-08T04:05:11","guid":{"rendered":"http:\/\/www.fairytalestores.com\/blog\/?p=515"},"modified":"2026-10-08T12:05:11","modified_gmt":"2026-10-08T04:05:11","slug":"how-to-lubricate-sinotruck-howo-drive-shaft-parts-4ab3-743bd0","status":"publish","type":"post","link":"http:\/\/www.fairytalestores.com\/blog\/2026\/10\/08\/how-to-lubricate-sinotruck-howo-drive-shaft-parts-4ab3-743bd0\/","title":{"rendered":"How to lubricate Sinotruck HOWO drive shaft parts?"},"content":{"rendered":"

Hey there, fellow Sinotruk HOWO owners and fleet managers! If you\u2019ve ever spent time diving into the guts of your heavy-duty truck, you know the drive shaft is one of those unsung heroes that keeps everything moving. But let\u2019s be real\u2014most of us only think about that spinning metal rod when it starts making weird clunks or feels off. As a Sinotruk HOWO parts supplier who\u2019s been in this game for over 8 years, I\u2019ve talked to so many guys who skip proper drive shaft lubrication or do it wrong, and end up paying way more in repairs than they need to. Today, let\u2019s get into the nitty-gritty of how to lubricate your HOWO drive shaft parts the right way\u2014no confusing jargon, just the stuff that actually works. Sinotruck HOWO Parts<\/a><\/p>\n

<\/p>\n

First, let\u2019s keep this simple: what parts of the HOWO drive shaft actually need lube? Let\u2019s break it down quick, because not every part is the same. Your standard HOWO drive shaft has three main components that rely on lubrication: the universal joints (those cross-shaped things that connect the shaft to the transmission and differential), the slip yoke (the part that slides in and out of the transmission to adjust for suspension movement), and the center support bearing if you\u2019ve got a long two-piece shaft (which is common on bigger HOWO models like the T7H or A7). I see guys waste time lubing the wrong spots all the time\u2014save that headache, focus on these three.<\/p>\n

Before you jump into getting your hands dirty, let\u2019s talk prep. You can\u2019t just yank on a grease gun and start pumping. First, park your truck on a flat, solid surface, set the parking brake, and chock the wheels\u2014front AND back. Don\u2019t skip the wheel chocks, trust me. I\u2019ve had a truck roll on me once when I forgot, and that was not a fun morning. Next, make sure the drive shaft is at the right height\u2014if you\u2019re a one-person shop, jack up the rear end (or front, if you\u2019re working on the transmission side) just enough so you can spin the shaft easily. If it\u2019s hanging down low, it\u2019ll be hard to reach all the grease fittings, and you might spill lube everywhere.<\/p>\n

Now, the most important part you need to get right: what kind of grease to use. This is where so many people mess up. I see guys grab whatever grease is sitting in their shop, even if it\u2019s cheap general-purpose grease. For HOWO drive shafts, you need a high-pressure, extreme pressure (EP) grease\u2014specifically, one that\u2019s rated for heavy-duty trucks and low temperatures (since HOWOs run in everything from -40\u00b0F winters in Northern China to 120\u00b0F summers in the Middle East). Our go-to at the parts store is a NLGI #2 lithium-complex EP grease\u2014most aftermarket HOWO parts suppliers carry this, and it\u2019s exactly what Sinotruk specs in their owner manuals. Avoid wheel bearing grease or multi-purpose household grease\u2014they break down fast under the constant torque and heat a drive shaft deals with. Another quick tip: never mix different types of grease. If you\u2019ve been using one brand, stick with it when you top up, or do a full flush if you\u2019re switching. Mixing can cause the grease to lose its protective properties, which leads to wear.<\/p>\n

Okay, let\u2019s get to the actual lubrication steps, step by step. This is for a standard single-piece HOWO drive shaft\u2014we\u2019ll touch on two-piece shafts later.<\/p>\n

Step 1: Locate all the grease fittings (zerk fittings, if you want to use the shop term). They\u2019re little metal nipples, usually at each end of the universal joint cross, and one on the slip yoke. On some newer HOWO models, the center support bearing (for two-piece shafts) also has a zerk fitting. Take a rag and wipe every single fitting clean before you attach your grease gun. If there\u2019s dirt or grime on the fitting, pushing grease in will just push that junk into the joint, which is a one-way ticket to early failure. I always carry a small wire brush in my toolbox for this\u2014gets all the crud off in 2 seconds.<\/p>\n

Step 2: Attach your grease gun to the first zerk fitting. Make sure it\u2019s locked on tight\u2014if it pops off mid-pump, grease will go everywhere, and you\u2019ll end up with grease all over your shirt and under your fingernails. That\u2019s not a flex, by the way. Pump the grease slowly. You want to see a little fresh grease oozing out of the joints (the rubber seals on the universal joints will push out a tiny bit). Stop when that happens\u2014don\u2019t over-pump! Over-greasing blows the seals, which lets dirt and water get in, and then you have to replace the entire universal joint way sooner than you should. I see this all the time\u2014guys think more grease is better, and it just causes more problems.<\/p>\n

Step 3: Move to the next zerk fitting on the same universal joint, and repeat. Do both ends of the cross first, then go to the slip yoke. For the slip yoke, the process is the same: wipe the fitting, attach the gun, pump until fresh grease comes out, stop. The slip yoke needs lube to slide smoothly\u2014if it\u2019s dry, you\u2019ll feel clunking when you accelerate or go over bumps. That\u2019s exactly the kind of wear that leads to expensive drive shaft replacements.<\/p>\n

Now, if you have a two-piece drive shaft (common on HOWO trucks with long wheelbases, like the 6×4 or 8×4 cargo models), you have an extra part: the center support bearing. That bearing is mounted to the frame, so it takes a lot of load, especially when the truck is fully loaded. The center support bearing\u2019s zerk fitting is usually easier to reach if you get under the truck near the middle. Again, wipe the fitting, pump grease until it oozes out, don\u2019t overdo it. A quick note here: some center support bearings are sealed for life? Wait no\u2014wait, no, most HOWO center support bearings have a zerk, but a handful of older models are sealed. If yours is sealed, don\u2019t try to grease it. Trying to pump grease into a sealed bearing will break it. If you\u2019re not sure, check your parts manual or shoot me a message. That\u2019s why it\u2019s good to buy parts from a reliable supplier\u2014we can tell you exactly what you need for your specific HOWO model.<\/p>\n

How often should you do this? That\u2019s the question I get asked the most. A lot of new HOWO owners think drive shaft lube is a 10,000-mile job, but that\u2019s only for trucks that run light loads on smooth roads. If you\u2019re driving a HOWO for construction, mining, or long hauls with full loads, you need to lube the drive shaft every 5,000 to 7,000 miles. If you run in dusty or muddy conditions? Do it every 3,000 miles. Dirt and water are the enemy of drive shaft parts\u2014they get past the seals and cause abrasion, so more frequent lube is worth it. Also, every time you replace a universal joint or slip yoke, make sure to grease the new parts immediately after installation. New parts come with a small amount of grease, but it\u2019s just for transport, not for running. You\u2019ll burn those new parts up in a week if you don\u2019t lube them right away.<\/p>\n

Wait, what about common mistakes to avoid? Let\u2019s list these because they\u2019re so preventable. First, don\u2019t use a generic grease gun that\u2019s full of old, crusty grease. If your gun has old grease in it, you\u2019re just pumping that junk into your drive shaft parts. Clean your grease gun every 6 months\u2014easy to do, just pump out all the old grease, add new grease, and you\u2019re good. Second, don\u2019t ignore the seals. If you notice that when you grease the universal joints, grease is leaking out from the seals, that means the seals are bad. Don\u2019t just keep pumping grease\u2014replace the universal joint. Bad seals let water and dirt in, which is the #1 cause of drive shaft failure. Third, don\u2019t forget to spin the shaft while you grease it? Wait, is that a thing? Oh right! A lot of guys grease only one spot and leave the rest. If you spin the drive shaft 1\/4 of a turn after greasing each fitting, you make sure the grease gets all the way around the universal joint cross, not just one side. That\u2019s a tiny step that makes a huge difference in how long your parts last.<\/p>\n

And since I\u2019m a Sinotruk HOWO parts supplier, let me tell you: I\u2019ve seen firsthand what happens when people skimp on drive shaft maintenance. I had a customer last year who skipped greasing his drive shaft for 20,000 miles because he \u201cdidn\u2019t have time.\u201d He ended up blowing two universal joints and wearing out the slip yoke, and he had to pay over $1,800 in parts and labor. If he\u2019d spent $20 on grease and an hour lubing it every 5,000 miles, he would\u2019ve saved almost all that money. That\u2019s not a brag, that\u2019s the truth\u2014taking care of your parts is way cheaper than replacing them.<\/p>\n

Now, a quick note for anyone who\u2019s replacing parts and lubing them at the same time. If you need a new universal joint, slip yoke, or center support bearing for your HOWO, come hit me up. I stock genuine Sinotruk and high-quality aftermarket parts for all HOWO models\u2014T7H, A7, 371, 420, you name it. I get it, nobody wants to deal with unexpected repairs, and making sure your drive shaft is properly lubricated is one of the easiest ways to keep your truck on the road and not in the shop.<\/p>\n

Wait, before I wrap this up, let\u2019s do a quick recap so you don\u2019t forget anything: 1. Focus lube on universal joints, slip yoke, and center support bearing (if applicable). 2. Use NLGI #2 lithium-complex EP grease, no multi-purpose stuff. 3. Wipe all fittings before greasing, attach gun tight, stop when grease oozes out (no over-greasing). 4. Lube every 3,000-7,000 miles depending on your use. 5. Spin the shaft a little while greasing to get full coverage.<\/p>\n

<\/p>\n

That\u2019s it! It\u2019s not rocket science, it\u2019s just basic maintenance that a lot of people sleep on. If you have questions about your specific HOWO model, or if you need parts for your drive shaft or any other part of your truck, feel free to reach out. Don\u2019t wait until your drive shaft starts making clunks or vibrates at highway speed\u2014take 10 minutes to grease it now, and you\u2019ll avoid a whole lot of headaches later.<\/p>\n

Sinotruck Parts<\/a> References:<\/p>\n

    \n
  1. Sinotruk HOWO Owner\u2019s Manual, Drive Shaft Lubrication Section, 2022<\/li>\n
  2. Heavy-Duty Truck Drive Shaft Maintenance Guidelines, National Truck Equipment Association, 2021<\/li>\n
  3. Lithium-Complex Grease Performance for Heavy-Duty Drivetrain Components, Society of Tribologists and Lubrication Engineers, 2020<\/li>\n<\/ol>\n
    \n

    Jinan Hong’an Machinery Parts Co., Ltd.<\/a>
    As one of the most professional sinotruck howo parts manufacturers and suppliers in China, we offer a wide range of products with superior quality. With abundant experience, we warmly welcome you to buy high quality sinotruck howo parts for sale here from our factory. For price consultation, contact us.
    Address: Quanli Heavy Truck Parts City, No. 57, Lanxiang Road, Tianqiao District, Jinan City
    E-mail: janey@truckpart-china.com
    WebSite:     https:\/\/www.truckpart-china.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there, fellow Sinotruk HOWO owners and fleet managers! If you\u2019ve ever spent time diving into … How to lubricate Sinotruck HOWO drive shaft parts?<\/span>Read more<\/a><\/p>\n","protected":false},"author":298,"featured_media":515,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[475],"class_list":["post-515","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-sinotruck-howo-parts-4379-74ecc3"],"_links":{"self":[{"href":"http:\/\/www.fairytalestores.com\/blog\/wp-json\/wp\/v2\/posts\/515","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.fairytalestores.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.fairytalestores.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.fairytalestores.com\/blog\/wp-json\/wp\/v2\/users\/298"}],"replies":[{"embeddable":true,"href":"http:\/\/www.fairytalestores.com\/blog\/wp-json\/wp\/v2\/comments?post=515"}],"version-history":[{"count":0,"href":"http:\/\/www.fairytalestores.com\/blog\/wp-json\/wp\/v2\/posts\/515\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.fairytalestores.com\/blog\/wp-json\/wp\/v2\/posts\/515"}],"wp:attachment":[{"href":"http:\/\/www.fairytalestores.com\/blog\/wp-json\/wp\/v2\/media?parent=515"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.fairytalestores.com\/blog\/wp-json\/wp\/v2\/categories?post=515"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.fairytalestores.com\/blog\/wp-json\/wp\/v2\/tags?post=515"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}